Mokhoa oa ho khetha boto e loketseng ea Filramic ea Fillic bakeng sa morero oa hau

Kenyelletso

Ha o sebetsa ka projeke ea litheko e boima - hore na ke kiln, sebopi, sebōpi, kapa oven-Ho khetha boto e nepahetseng ea Filramic e nepahetsenge bohlokoa bakeng sa polokeho, katleho le ho tšoarella. Ka limaraka tse fapaneng, batho ba fapa-fapaneng, le litlhaloso tse teng, ho khetha boto e nepahetseng ho ka bonahala li le boima.

Tataisong ena, re tla ikhula mokhoa oa ho khetha tse loketseng haholoBoto ea Ceramic FiberBakeng sa litlhoko tsa hau tse khethehileng, ho u thusa ho qoba liphoso tse theko e boima le ho netefatsa ts'ebetso ea nako e telele.

Ke Hobane'ng ha Litaba Tse Ikhethileng li Khetholla

Boto ea Ceramic Fiber e tsebahala ka:

• Ho hanyetsa ha molumo o phahameng

• Sebopeho se bobebe

• Boholo ba Tlokotsi

• Ho hanyetsa mollo

Empa ho sebelisa mofuta o fosahetseng ho ka fella ka ho se atlehe pele ho nako, ho lahleheloa ke mocheso kapa esita le likotsi tsa polokeho. Ke ka lebaka leo ho utloisisangLintlha tsa Bohlokoa tsa Khethoe bohlokoa haholo.

1. Fumana mocheso o matla oa ts'ebetso

TheTekanyetso ea mochesoke e 'ngoe ea lintlha tsa bohlokoahali.

• Liboto tse tloaelehileng: ho fihlela la 1260 ° C (2300 ° F)

• Litoropo tsa mocheso o phahameng: Ho fihlela ho 1430 ° C (2600 ° F)

Keletso:Kamehla khetha boto e nang le tekanyetso ea mocheso bonyane 10-15% e phahame ho feta mocheso oa hau oa ho feto-fetoha o feto-fetohang.

Likopo:

• 1260 ° C: Kakaretso ea Nana ea Liindasteri, li-Kilns, li-stoves tsa patsi

• 1430 ° C: Likopo tsa mocheso o phahameng joaloka tšepe e qhibilihileng, tlhahiso ea khalase, aerospace

2. Khetha leruo le nepahetseng

Mabatooa a Ceramic Faber a ne a fapaneLitlamo, hangata e lekantsoe ho kg m³ kapa lb ft³.

• Ngaka e tlase (160-240 kg m³ 10-15 lb f f³):
  Molemo ka ho fetisisa bakeng sa pokello e bobebe, libaka tse fokolang tsa mobu

• TLHOKOMELISO E MOLEMO
  E loketse lits'ebetso tse ngata tsa indasteri ea indasteri

• Bofebe bo phahameng (320-400 + kg m³ 20- 20-25 + __ ft³):
  E loketse ho tsitsa ha sebopeho, ho beoa hoa mojaro kapa ho hanyetsa ha ho hanyetsa

Khetha letsoalo le phahamengBakeng sa libaka tse pepesitsoeng ho phalla ha khase, ho tsuba kapa khatello ea maikutlo.

3. Khetha botenya bo nepahetseng

Likhetho tse tloaelehileng tsa botenya:10mm ho 100mm(0.4 "ho 4")

• Liboto tse tšesaane (10-25mm):Bakeng sa libaka tse thata kapa e le tšitiso ea mocheso

• Liboto tsa thicker (50-100mm):Bakeng sa likhohlopo tse boima tsa boima, tse ntle haholo

Moto oa board, ho molemo haholo-Empa le litšenyehelo tse phahameng le boima ba 'mele.

4. Tsamaisa boto ho kopo ea hau

5. Nahana ka ho hanyetsa ha lik'hemik'hale le tikoloho

Haeba morero oa hau o kenyelletsa:

• Likhase tse tharo kapa lino

• Mongobo kapa mosi

• Oxidizing ea ho fokotsa masholu

... Ebe u etsa bonnete ba hore u khethae tsitsitse hangataCeramic Faber o hanyetsang lintho tseo. Liboto tse ling li kenyelletsa Zirconia kapa li-blasitive tse ling ho ntlafatsa ho hanyetsa ha lik'hemik'hale.

6. Lintlha tse ling tseo u ka li nahanang

• Ho hlophisoa liboto:Kenyelletsa likhoele kapa mesh bakeng sa matla a betere

• Bokaholimo:Phetoho e Ntlafetseng Khanyetso

• Lihlooho tse tlase tsa lerole:Bakeng sa litheolelo, libaka tse sireletsehileng tsa mosebetsi

• Boholo ba tloaelo kapa lipane tse halikiloeng pele:Fokotsa basebetsi le litšila

LIPOTSO TSE BOTSOANG HANGATA (FAQS)

Q1: Nka khaola fantisi ea feramic?
Ee, ka thipa ea ts'ebeliso kapa ho bona. Roala liatlana le masenke ea lerole bakeng sa ts'ireletso.

Q2: Ho etsahalang haeba ke sebelisa tekanyetso e fosahetseng?
Boto e ka senya, ho qhekella, kapa ho nyenyefatsa, ho lebisa ho ho hloleha ho hloleha kapa likotsi tsa polokeho.

Q3: Na li-waber tsa wastic li sebetsa ka thata?
Maemong a mang, ho joalo, haeba e sa qhekelloa kapa e silafalitsoe, e ka sebelisoa hape nakong ea ho lokisa kapa ho fallisoa.

Sephetho

Ho khetha boto ea fiber e nepahetseng ho bolela ho hlahloba projeke ea hau:

Ho hlokahala litlhoko tsa mocheso
Litlhoko tsa TUMELENG
Botenya ba bot
✅ Ho pepesetsoa tikoloho
✅ Maemo a Mecha

Ka ho utloisisa kopo ea hau 'me u e fetohele le litlhaloso tse nepahetseng tsa boto, u tla netefatsats'ebetso e nepahetseng, katleho ea matla le kohlopo ea nako e telele.