Application of 25mm wire mesh rock wool roll felt 100K cement plant
Release Time: 2026-05-20
Share:
Application of 25mm wire mesh rock wool roll felt 100K cement plant? 25mm wire mesh rock wool roll felt (100K) is a very classic and practical insulation material for high temperature conditions in cement plants. Based on your previous question, we will continue to provide you with a detailed breakdown of its specific applications, core advantages, and actual construction plans in cement plants. Why is 100K density+25mm thickness+wire mesh the key combination?
Firstly, 100kg/m ³ density (100K): This is the high-density standard in the industrial field. It not only ensures excellent insulation performance, but also has higher compressive and tensile strength than low-density products, making it less prone to sinking or tearing due to gravity or vibration. Its melting point is over 1000 ℃ and it can maintain stability at high temperatures for a long time.
Secondly, 25mm thickness: This is a very flexible thickness specification. It can be used for multi-layer staggered laying to construct efficient and thick insulation layers, or for single-layer wrapping of irregular parts, balancing insulation effect and construction convenience.
Thirdly, wire mesh protection: This is essentially a "steel rib and iron bone". The restraining force of the wire mesh can firmly fix the rock wool, preventing the insulation layer from cracking, falling off, and sagging. At the same time, it provides external impact protection for the insulation layer, extending its service life.
1. Rotary kiln supporting pipelines, hot air pipelines, primary/secondary air pipelines
2. External insulation of preheater and cyclone shell
3. External insulation of grate cooler shell and hot air hood
4. Insulation for the outer walls of coal powder pipelines, exhaust gas pipelines, and dust removal pipelines
5. Cement silo, material bin, steam tracing pipeline, valve insulation
Rosewool Insulation Refractory Co.,Ltd. reminds you that when purchasing, in addition to specifying a density of 100kg/m ³ and a specification with 25mm wire mesh, it is recommended to confirm the thermal conductivity (usually between 0.035-0.045 W/(m · K) at room temperature, with lower values for better insulation) and hydrophobicity (high-quality products usually ≥ 98%) of the product with the manufacturer to ensure long-term performance of the material in complex environments of cement plants.
